Відео

Ahaha thank you so much it was for a school project and I had absolutely no time to make any Emus so I just used All Black figures and made them run the way they did lol

Thank you so much for the comment I really hope you get your chance to also get some Og P1s but I’m glad to see your a fan of them aswell and I’m very glad you got to see this film !!!! I’m hoping soon to make another one with even more Ogp1 clones !

I will say the 332nd and 187th I’m very impressed how well it fits but the 327th and 501st are slightly off but definitely lots of design that went into it to get that match

My man thank you so much for that comment that’s exactly what I wanted to achieve so I’m so happy you also got that old childhood memory of the good old stopmotion days !

Wow it’s definitely been a while since I last even saw this video but I will say I had a lot of free time to study the tank by simply looking at photos of it and at the time there where less complicated pieces so it was somewhat easy to see which pieces were required and from then I just kept looking at the photos and I eventually built it like you see today I sadly wouldn’t know how to rebuild it again considering it’s been almost 10 years since the last time but definitely these days since this video there are plenty of more better models then this one

Oh

Hi there it depends if it’s like in towards the end of a video when I made a mistake with sealing there is no way to fix it if it looks smudged or if you put so much Please don’t throw away the figures you can easily take off the decal and use the blank figure to try again For sealing it should just be 1 second (or say one one thousand) for spraying forms. Distance of 15 to 20cm or 6 to 8 inches Hope this has helped and the same thing happens to me so not to worry sometimes accessories such as clone back packs or Kama and pauldron can fix them by covering them Hope this has helped any other questions feel free to ask :)

Thank you for your response 👍🏻 I bought a small bottle of Microscale Micro Set and will use a small brush. Maybe the result will be better. Kind regards

@@alxk996 I hope it does and if possible would you be able to let me know if it works for you after words Any other help always feel free to ask :)

Thank you so much my man !! I’m very glad that you noticed it. When I was making the film I was in need of blue lightsaber bolts as I didn’t have enough and I wanted to make this movie in time for a contest so I was so happy when I came across the 76171 miles mech had translucent blue prices and they worked great so I really appreciate it that you thought it was an awesome idea !

@@CLON3RAW3S0ME That was a super cool idea. Thank you for hearting my comment 👍

oh no my man im sorry my man that happened to you, I also see all our comments from previously were also deleted thats a shame my man but Im happy that you've made a new account with the same name :)

Yeah glue should work !! If you eventually do more figures definitely get sealant along the way but for now yes so long as it is a white glue stick nothing else it will be a good cheap way of sealing your figure! Hope this helps and hope your decaling goes well and don’t worry if it doesn’t end up being exactly how you wanted it no one ever gets it great the first time around not even me Best of luck !

@@CLON3RAW3S0ME Thanks, just did the decal and it was really good, apart from the fact that one of the leg prints was too high😅. The tutorial was really helpful, so thanks again!

@@PurplePenguin69_ I’m so Glad to hear it if you need anymore help always feel free to ask :)

Thank you so much my man ! I just recently saw your channel oh man you have such an impressive ogp1 and og p2 Army my man !

What a waste of good genes 😔

Thank you so much Timmy It means alot

Thank you so much my son I’m so glad you could witness it with sound :)

I hope it has my man 😅

Thank you very much :)

Thank you so much that means a lot to me I love the practical side of LEGO lightsabers !

Thank you my man I appreciate sorry for the log waited reply also but it means a lot to me

💀🗿💀🗿💀🗿💀

Thank you my man !!!!

Thank you so much !! I’m glad it felt nostalgic for you my man I absolutely love the older figures and want to use mainly just the older figures to give that nostalgic vibe

That is a great point unfortunately I don’t own any 😞

My man it’s so good to see you here my man always a privilege my brother !! And for our last conversation for some reason I can’t send you a friend request on discord was wondering if you could try mine and see if that works my discord is lego7163 hashtag 8649 I’ve gotta stay more in touch with you my man

@@CLON3RAW3S0ME just sent you a request bro, always nice to catch up. Actually I managed to get the Ashoka sets early so expect a review tomorrow. Also I've been working on a huge moc i think you'll like bro.

@@jdstudios1912 my nan I got your request it’s gonna be amazing to finally chat with you more and I’d love to see that review my man and even more so that huge moc of yours !!!

My man Will always great to see you on the channel and absolutely like the rest of this channel filled with unfinished projects I hope the next one I’ll do will at least be finished 😅 but can’t wait to see your venator my man

@@CLON3RAW3S0ME u know it

My man good to see you again !! And haha absolutely my man I’m glad that it was still pleasing and got you surprised If I could do it next time I’d make him rag doll the troopers into each other and use the panels as huge scissors Aswell as make him use one of the helmets like a dodge ball/shield blocking blaster bolts and throwing the helmet at the last guy lol

@@CLON3RAW3S0ME I suppose you did that scene before that episode with Maul in Clone Wars haha

@@G31M1 those years were awesome actually this video was actually meant for an advertisement of Wiseguycsutoms decals in which he launched a clone darth maul decal unfortunately school came back around and I had no time to finish it but he wanted originally naboo and he said I could kill the clones in anyway I like but it’s gotta be a lightsaber

@@CLON3RAW3S0ME Ohhh so that's the backstory. I'm still glad you shared this, even tho you didn't really had a use for it anymore. At least not the intended one.

@@G31M1 my man that means a lot more than you know thank you so much my thoughts exactly it’s better to share it then just keep it for myself and I’m really happy I did and more happy that you got to see it my man :)

My man it’s so good to see you on the channel and absolutely but that’s why it’s “just like the simulations ….”

@@CLON3RAW3S0ME lol, well you actually got recommended on my yt shorts lol so that’s good

Hi there as long as it’s metal polish it’s a good substitute :)

Thank you so much my man !

Hi there it’s best you do seal your figure however if you just plan to put them for display make sure you press a lot on those decals becuse even in time those decals can start too peel I have made quite a lot of decals most of which hasn’t been sealed for well over 2 years but so far just for display hasn’t seemed to have damaged them but 1 or 2 have peeled easily due to non sealing Yes it’s necessary I’ll say in the long run

@@CLON3RAW3S0ME Thank you for the detailed explanation! It was very helpful. Have a good day

@@user-bh5fv4ee3t your most welcome :) and you have yourself a great day !!!

Your most absolute welcome :)

Hahaha I’m glad someone noticed The story behind the chip was I let my friend borrow it and that’s how it came back Thank you my man for the golden comment

Hi there That’s correct unfortunately the leg decals will rub off if you move them without carving the hips there is too much friction between the leg decal and the hip I know from personal experience and have rubbed off 3 pairs You could alternatively cut the leg decal in half that way it’s just the knee pad and below I hope this helps If you need any more help since your a beginner let me know and I’ll be more than happy to help :)

Yes if you wish your figure to last for longer other wise no but that’s at your own risk mine without sealant which has been over 2 years have started to easily peel As an alternative you can also use micro gloss to seal the figure as opposed to spraying on sealant you can just brush this small amount of micro gloss to it Hope this helps

Thank you so much ! It means a lot to me to hear that, which decals do you have ready to decal ?

If it works it works !! And that’s actually awesome to hear a different way than what people usually do to be honest I’ve been trying to find a different way from the way I used in this video as It’s a very messy method

The best part is we did use cheap plastic knives they just look really good but they were really Cheap on good old ali express also sorry for the long awaited reply my man

@@CLON3RAW3S0ME Well damn, good old Ali Express! I meant some cheap white generic plastic knifes that are made for eating something. The shitty one that instantly break if you apply a bit too much pressure to the knife while trying to cut something.

Ahaha my man it sure did I just hope it has helped everyone out who has watched it aswell as sorry also for the long awaited reply on this comment also how have you been my man

@@CLON3RAW3S0ME Don't worry about answering late, I'm used to it by now hahahah Also pretty epic how you can run ads now :)

Lol Although hope not :.(

Thank you my good man I’m glad you liked my version of it All though they messed it up I love it the way it is although It can never beat any of the other ones

@@CLON3RAW3S0ME I had the AAT 9012 from 2009 which I also really liked. Overall they got the proportions of the tank itself right even tho they messed up the secondary armament a bit. But damn why was that version of the AAT so huge? It's probably twice as big as it should be in relations to the minifigures ahahha

@@G31M1 that was with everything clone wars related but I loved it man I sadly don’t even own a single one but I manage to have 4 of the original 2000 aat tan tanks They are perfect in size and accuracy

@@CLON3RAW3S0ME I never noticed that those sets were so huge. For example the Clone Turbo Tank from 2010 doesn't seem that big compared to other non Lego toys from what I just researched. Maybe it seemed a bit smaller to me in The Clone Wars episode were Ahsoka almost gets overrun and choses to be stubborn defending her position on top of a Turbotank. But then again Ahsoka was still way smaller than a 6 ft / 1,83 m tall clone in armor haha

Thank you very much my man I’m also not a moc builder my self is his was very basic and this is all the pieces I had at the time as I wasn’t into buying pieces from online But thank you so much for your compliment my man

@@CLON3RAW3S0ME Yeah I was pretty sure that this was your first try at building a diorama and you just felt like sharing it because why not? But it turned out pretty good! It really looks like a scene frozen in time with the explosion and the shockwave throwing troopers around. Well done my man!

Ahaha I love he Kaminoan reference This one I actually picked up from one of the sets I like the fact that it truly is a misprint and yes I know about the misprint clones which are insanely expensive for some reason

@@CLON3RAW3S0ME Yeah dude, you're really lucky! It's up to you what you do with the mini figure. You can name him 99 or something or you could take advantage of the fact that people are so into them and make bank $$$ hahah

Ahaha I’m so glad that you noticed they were German your one of the first to get it and of course the first person to point out the tissues I unfortunately did not have cotton at the time but definitely a great idea to do use cotton in the future

@@CLON3RAW3S0ME As a German I noticed the German voices of course hahahh If we Germans would have won WWII you definitely wouldn't have to worry about having cotton, but of course the AlLiEs had to ruin the party 😒